How to apply shellac?
Watch the video
If you want to have the perfect manicure and at the same timeDo not increase nails, you need to think about how to apply shellac. Shellac - a modern covering of the nail plate, which can stay on the nails for up to 14 days. This product is applied in the same way as a conventional varnish, but for hardening it is dried in an ultraviolet lamp. The article presents step-by-step instructions for applying shellac.
Application of shellac
It is worth noting that the creation of the original shellac-coated manicure takes place in several stages.
Preparation of the nail plate
Before applying shellac at home,you need to do a manicure in the way that you do before the usual nail polish coating. It is also necessary to polish the surface of the nail with a nail file for grinding (the nail file must be 180/180) and create a shape of the nail plate.
Removing the fat coating
After the manicure is done and the nailspolished, it is necessary to understand how to apply shellac. The first thing to do is remove the fat covering of the nail and all small particles that remain after the grinding. Make it a special degreaser, which can be purchased at a specialized store. This stage needs to be given special attention, since even the slightest droplet of fat or any particles will not hold the coating for a long time. Next, you need to apply a Bond-gel.
Applying the base layer
Before applying the colored gel, the nail plateIt is necessary to cover with a transparent base gel (base). After this, the substrate should be dried in a 36-watt UV lamp for 1 minute or more. An adhesive layer from the base coat is not removed.
Applying a color layer
The prepared sticky base is coloredlayer. It is applied in the same way as a regular varnish, i.e. using a brush from the bottle. After the nails of one hand are covered with lacquer, the hand should be placed in a lamp and dried for a few minutes. The layer of shellac should be thin, without streaks and divorces. Otherwise, lacquer clots may appear, which after drying will look messy.
Next you need to varnish the nails of the other handand do the same. The number of layers depends on the desired result: the more layers, the more saturated the color. The maximum number of layers is 3. After drying, each layer is treated with a degreasing agent. Thus it is possible to apply shellac on the nails.
At the very end, shellac must be treatedfixing means: seal the tips of the nail plates and cover the nails with a substance that is also dried in a lamp. And to soften the cuticles it is necessary to treat them with special oil. Following the instructions, you can apply shellac at home.
Consequences of shellac
In addition to the positive sides of this coverage, there are also negative ones:
- weakening of the nail cover;
- exfoliation of nails;
- painful sensations when pressing on the nail.
On the possible consequences of using shellac, read the comments of our users: Who did Shellac | It is true that after him the nails are in terrible condition.